AFCONA 3038

牌号AFCONA 3038
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Designed as anti-blushing agent for thermoplastic systems, anti solvent popping agent for all baking paints and act as flow agent for solvent-based paints.

Product Properties:

  • The properties of AFCONA - 3038 and 3037 are very similar. The main difference is that AFCONA - 3037 contains a highly compatible polysiloxane and AFCONA - 3038 does not contain any silicone. Thus, in terms of leveling and anti-crater, AFCONA 3037 performs better.
  • In overall, AFCONA - 3038 is more polar, thus it has better solvency power than AFCONA-3037. Therefore, it has better resin solubility, which eventually promotes better flow. This compensates the non silicone containing character. Therefore, AFCONA - 3038 is suitable for systems where silicone is not allowed or too high curing temperature systems, such as, coil and can coatings.
  • In general, AFCONA - 3038 have the same application usage as AFCONA - 3037.

Therefore, AFCONA - 3038 can be used as:

  • As anti-blushing agent for lacquer drying system like NC and Thermoplastic acrylic
  • Anti solvent popping and solvent boiling agent in baking paint
  • Additive to prevent streaking in chlorinated rubber systems
  • Additive to promote flow and leveling
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3779 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3038 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3700 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3231 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3232 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3773 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777E Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3085 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3285 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved