AFCONA 3231

牌号AFCONA 3231
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Slip and leveling additive used mainly in metal and UV coatings.

Product Properties:

  • AFCONA-3231 gives very good slip and the slip characteristic is oily type, also called as wet look appearance. Therefore, it can enhance visually film thickness AFCONA - 3231 normally used in metal coatings like industrial baking systems, car refinish polyurethane top clear coats and other vehicle paint.
  • AFCONA - 3231 also widely used in UV coatings due to the good leveling and slip performance. However, it does not contain any reactive functional group that can cross-link with UV resin system.
  • Due to its high surface activity, AFCONA-3231 can interfere with intercoat adhesion when recoated without sanding. If air is introduced by the application equipment, the use of small amounts of defoamers such as AFCONA-2020 and AFCONA-2022 are recommended.

AFCONA - 3231 is recommended in below systems:

  • 2K Polyurethane. It gives low sensitivity to inner bubble.
  • Industrial baking systems where baking temperature is less than 170°C. In normal case, AFCONA - 3030 or AFCONA - 3233 is recommended for industrial baking systems. However, if higher slip is needed, AFCONA -3231 will be the better choice.
  • UV coatings. A lot of time, AFCONA - 3231 is selected for UV due to the less foam stabilizing effect and good compatibility.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3779 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3770 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3700 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3031 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3775 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777E Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3250 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3035 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3773 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved