AFCONA 3034

牌号AFCONA 3034
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Additive designed to reduce the surface tension, improve the substrate wetting, anti-crater performance and levelling (especially vertical levelling).

Product Properties:

  • With the fluorocarbon modification, AFCONA-3034 itself has very low surface tension. Thus, this additive normally is used as real problem solver for critical condition on surface tension. The present of fluorocarbon further improves the performance of a normal polysiloxane on anti-crater, substrate wetting and leveling.

  • To solve the vertical leveling problem AFCONA-3034 often is used together with our fluorocarbon modified acrylic leveling additives such as, AFCONA-3670, AFCONA-3700 and AFCONA - 3777. These combinations also can solve critical crater problems and among all, the best combination will be with AFCONA-3700.

  • AFCONA-3034 is extremely compatible with most paint systems and can be used in both water and solvent-based industrial coatings. The advantage of improved substrate wetting, caused by reduced interfacial tension, also results in foam stabilization in most cases. Therefore, it is appropriate to use suitable defoamers at the same time.

Applications:

  • Plastic coatings like PU, UV, and thermoplastic acrylic systems. it gives good leveling as well as improved substrate wetting. Eliminates common problems of plastic coating like crater and leveling.
  • Industrial baking systems where anti-crater and vertical leveling is needed.
  • Other solvent based coating where anti-crater, substrate wetting and vertical leveling are needed.
  • It also can be used in water-based systems for leveling, anti-crater and slip performance.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3670 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3232 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3034 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3250 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777E Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3231 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3031 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3775 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3038 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved