AFCONA 3277

牌号AFCONA 3277
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Anti-crater, substrate wetting and leveling agent for solvent-based coatings.

Product Properties:

  • AFCONA - 3277 is the 100% active ingredient version of AFCONA - 3777. Thus, it has sumilar performance as AFCONA - 3777 in the same solid content form.
  • AFCONA - 3277 is a fluorocarbon modified plyacrylic. It can serve as a non-silicone leveling agent, where silicone is not permitted due to intercoat adhesion problems. However, we highly recommend the usage of combination with a suitable Polysiloxane for better overall performance, if silicones are permitted.
  • If the requirements are to solve problems caused by high surface tension or to bring down the surface tension strongly, AFCONA - 3700 will be a better choice. AFCONA - 3700 is also nearly 100% active and due to the higher fluorocarbon content more effective with a lower dosage.
  • AFCONA - 3700 has better compatibility properties than AFCONA -3277. However, the foam stabilizing effect is slightly higher.

AFCONA - 3277:

  • improves leveling
  • prevents cratering
  • helps substrate wetting
  • acts as a defoamer and de-aeration aid
  • does not interfere with intercoat adhesion

AFCONA - 3277 is recommended for all solvent-based and high solid systems. Due to AFCONA-3277 not containing any solvents, it is very suitable to use in high solids and solvent-free systems like UV, epoxy, polyurethane, PMMA flooring, etc.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3777 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3670 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3750 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3770 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3730 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3775 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3085 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3251 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved