AFCONA 3750

牌号AFCONA 3750
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Wetting, leveling and flow control agent for solvent-based coatings with excellent anti-crater properties.

Product Properties:

  • AFCONA - 3750 is 52% solid version of AFCONA - 3700 for better handling in winter because the viscosity of AFCONA - 3700 very high, almost not pourable in winter. AFCONA - 3750 is a highly fluorocarbon modified acrylic polymer. It has very low surface tension and therefore, it can substitute and perform as silicones without the side effects of silicones.

  • AFCONA - 3750 reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent based coating.

  • Due to the low surface tension, it gives very good substrate wetting and normally recommended to combine with a silicone based leveling agent to gives optimum performance on leveling, anti-crater as well as flow control.

  • AFCONA - 3750 is widely used, especially in refinish topcoats as a good prevention for crater formation, caused by different environment of application sites.

AFCONA-3750 is an excellent anti-crater and substrate wetting agent. AFCONA-3750 is especially suitable for:

  • stoving enamels based on alkyd, acrylic and polyester resins
  • polyurethane coatings
  • two-pack epoxy compounds
  • air-drying alkyd systems
  • UV coating
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3777E Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3779 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3031 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3775 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3730 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3700 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3232 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved