AFCONA 3251

牌号AFCONA 3251
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Additive designed to perform the highest slip in all solvent based coating without foam stabilizing property.

Product Properties:

  • AFCONA-3251 is the improvement version of AFCONA 3250. It specially developed to further improve the leveling performance.
  • Most polysiloxane with good transparency stabilize foam, or, when not stabilizing foam affect the transparency of the coating. Thus AFCONA - 3251 fulfill all the needs of most paint formulators where it gives very good slip, no foam stabilizing effect and good transparency.

Due to these excellent properties AFCONA - 3251 is very suitable for use in:

  • All wood coating systems like NC, Acid Curing, PU and UV. Slip is always one of the important measurements for wood coatings.
  • Top coats in plastic coating applications like mobile phone and those plastic items that frequently touched by our hand. In these applications, slip is very important.
  • UV coatings, where it gives very good slip and leveling without influence the clarity of the paint film.
  • Refinish topcoat that based on polyurethane.
  • Others paint systems where high slip is desired.

Note: AFCONA - 3251 will become slightly hazy at temperatures below 5° C. This will not influence the quality.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3670 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3285 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 6788 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3038 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3779 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3778 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3730 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777E Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved