BioDur® CCM Plus® Alloy
| 牌号 | BioDur® CCM Plus® Alloy |
| 厂家 | Carpenter Technology Corporation |
| 分类 | Cobalt |
| 介绍 | BioDur® CCM Plus® alloy is a non-magnetic, cobalt-chromium-molybdenum alloy exhibiting high strength, corrosion resistance, and wear resistance. This alloy is a high carbon version of BioDur Carpenter CCM® alloy and meets the requirements of ASTM F1537, ASTM F799, ISO 5832-12 and ISO 5832-4. BioDur CCM Plus alloy is a wrought powder metallurgy product produced by vacuum induction melting (VIM) followed by gas atomization and hot isostatic pressing to produce 100% dense billets. These billets are then processed by conventional steel-making practices to produce finished products. BioDur CCM Plus alloy possesses the following product attributes: * homogeneous chemistry and microstructure; * small, uniformly distributed carbides, typically less than 10 microns in length as measured on longitudinal sections; * fine austenitic grain size, typically ASTM E112 grain size number 12 and finer for hot rolled material and 10-11 and finer for material annealed at 2050/2100°F (1121/1149°C) for 1 hour and water quenched; * improved forgeability over BioDur Carpenter CCM alloy; * meets ASTM F799 requirements without requiring thermomechanical processing; * retains a high strength level after high temperature annealing; * improved machinability over BioDur Carpenter CCM alloy. Because BioDur CCM Plus alloy does not require thermomechanical processing in order to meet ASTM F799 mechanical property requirements, Carpenter normally supplies the finished product in the hot worked condition. Applications: BioDur CCM Plus alloy should be considered as a candidate for use in the orthopedic industry for joint replacement and fracture fixation devices such as total hip, knee, and shoulder replacements, especially when wear or fatigue properties are of major importance or where intricate high strength forgings are required. BioDur CCM Plus alloy should be considered for use in producing large forgings where it is difficult to attain ASTM F799 properties throughout the forging's cross section due to a lack of sufficient thermomechanical processing. Applications have included hip and knee forgings and machined modular femoral heads for metal-metal and metal-HDPE wear couples. |
在线客服: 
申请技术报告方式
可通过以下我公司客服QQ，索要技术报告
| 客服1： |
客服2： |
| Carpenter Technology Corporation 产品展示 | 种类 |
|---|---|
| Micro-Melt® CCW Alloy | Cobalt |
| BioDur® CCM Plus® Alloy | Cobalt |
| Carpenter L-605 Alloy | Cobalt |
| Vicalloy I Alloy | Cobalt |
| Micro-Melt® BioDur® Carpenter CCM® Alloy | Cobalt |
| BioBlu™ 27 Alloy | Cobalt |
| BioDur® Carpenter CCM® Alloy | Cobalt |
| ACUBE® 100 Alloy | Cobalt |
| Carpenter P6 Alloy | Cobalt |
| Carpenter MP35N Alloy | Cobalt |
订购说明
上海松翰塑化科技有限公司订货流程
【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。