Micro-Melt® BioDur® Carpenter CCM® Alloy

牌号Micro-Melt® BioDur® Carpenter CCM® Alloy
厂家Carpenter Technology Corporation
分类Cobalt
介绍Micro-Melt® BioDur® Carpenter CCM® alloy is a non-magnetic, cobalt-chromium-molybdenum wrought alloy exhibiting high strength, corrosion resistance, and wear resistance. This alloy is a powder metallurgy version of BioDur Carpenter CCM alloy (ASTM F 1537 Alloy 1), which is a high nitrogen, low carbon wrought version of ASTM F 75 cast alloy.

Micro-Melt BioDur Carpenter CCM alloy is produced by vacuum induction melting (VIM) followed by gas atomization and hot isostatic pressing to produce 100% dense billets. These billets are then processed by conventional steelmaking practices to produce millform products such as billet, bar and wire that are subsequently processed into finished articles. Hot isostatically pressed (HIP'd) near net shapes and loose powder are also available for processing into finished articles.

Micro-Melt BioDur Carpenter CCM alloy possesses the following product attributes:

  • homogeneous chemistry and microstructure;
  • small, uniformly distributed carbides, typically less than 5 microns in length as measured on longitudinal sections;
  • higher yield strength and ultimate tensile strength than cast-wrought BioDur Carpenter CCM alloy in the warm-worked or annealed conditions;
  • higher hardness than cast-wrought BioDur Carpenter CCM alloy in the warm -worked or annealed conditions
  • finer grain size than cast-wrought BioDur Carpenter CCM alloy in the warm- worked or annealed conditions;
  • higher rotating beam fatigue strength than cast-wrought BioDur Carpenter CCM alloy in the warm-worked condition.

Carpenter generally supplies Micro-Melt BioDur Carpenter CCM alloy in the warm-worked condition since this condition provides the highest mechanical properties, highest hardness, finest grain size, and highest fatigue strength.


Applications:
Micro-Melt BioDur Carpenter CCM alloy has been used in the orthopedic implant industry for joint replacement and fracture fixation devices such as total hip, knee, and shoulder replacements. This alloy is particularly suited for small diameter bar and wire applications, where high strength or high fatigue resistance is required.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Carpenter Technology Corporation 产品展示 种类
Carpenter L-605 Alloy Cobalt
Micro-Melt® BioDur® Carpenter CCM® Alloy Cobalt
Micro-Melt® CCW Alloy Cobalt
Carpenter MP35N Alloy Cobalt
BioDur® Carpenter CCM® Alloy Cobalt
BioBlu™ 27 Alloy Cobalt
Vicalloy I Alloy Cobalt
BioDur® CCM Plus® Alloy Cobalt
ACUBE® 100 Alloy Cobalt
Carpenter P6 Alloy Cobalt

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved