| 牌号 | Dyneon™ FLUOROELASTOMER FC 2177D |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2177D can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2177D should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| Dyneon™ PTFE TF 5033Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TFM 1700 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE DISPERSION TF 5050Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2144 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 1645 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE DISPERSION TF 5070GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FE 5623 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2179 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2121 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 9201Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
