EOS NickelAlloy HX

牌号EOS NickelAlloy HX
厂家EOS GmbH
分类Nickel
介绍EOS NickelAlloy HX is a heat and corrosion resistant metal alloy powder intended for processing on EOSINT M 280 systems.

EOS NickelAlloy HX is a nickel-chromium-iron-molybdenum alloy in fine powder form. Its composition corresponds to UNS N06002. While the wrought and cast versions of the alloy generally are solution annealed, the laser sintered version has a high strength and good elongation already in the as-built condition. Solution annealing of the laser sintered material will homogenize the microstructure, relax internal stresses and increase the elongation, while slightly decreasing the strength.

This type of alloy is characterized by having high strength and oxidation resistance also at ele- vated temperatures, and is often used up to 1200 °C. Therefore its applications can be found in aerospace technology, gas turbine parts, etc.

Standard laser processing parameters results in full melting of the entire geometry, typically with 20 µm layer thickness. Parts built from EOS NickelAlloy HX can be heat treated and mate- rial properties can be varied within specified range. In both as-built and solution heat treated states the parts can be machined, spark-eroded, welded, micro shot-peened, polished, and coat- ed if required. Unexposed powder can be reused.

This document provides information and data for parts built using EOS NickelAlloy HX powder (EOS art.-no. 9011-0023) on the following system specifications:
  • EOSINT M 280 with PSW 3.6 and EOS Parameterset HX_Surface 1.0

Typical achievable part accuracy:
small parts: ± 40-60 µm
large parts: ± 0.2%
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
EOS GmbH 产品展示 种类
EOS CarbonMide® 尼龙12
EOS Aluminium AlSi10Mg Aluminum
EOS PA 2200 Top Speed 1.0 尼龙12
EOS PA 2202 black 尼龙12
EOS PA 2200 Balance 1.0 尼龙12
PrimeCast® 101 PS (专用型)
EOS PA 1101 尼龙 11
EOS NickelAlloy IN625 Nickel
EOS PA 3200 GF 尼龙12
EOS Alumide® 尼龙12

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved