EOS NickelAlloy IN625

牌号EOS NickelAlloy IN625
厂家EOS GmbH
分类Nickel
介绍EOS NickelAlloy IN625 is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOSINT M systems.

Parts built from EOS NickelAlloy IN625 have chemical composition corresponding to UNS N06625, AMS 5666F, AMS 5599G, W.Nr 2.4856, DIN NiCr22Mo9Nb. This type of alloy is characterized by having high tensile, creep and rupture strength. Conventionally cast or wrought components in this type of nickel alloy have typically excellent fatigue and thermal- fatigue properties combined with good oxidation resistance.

EOS NickelAlloy IN625 is expected to have good corrosion resistance in various corrosive envi- ronments. Especially sea-water applications require high pitting and crevice corrosion resistance, stress-corrosion resistance against chloride-ions, high tensile and corrosion-fatigue strength. However, corrosion resistance has not been verified yet and therefore it is recommended to conduct relevant corrosion tests and studies prior to use in specific corrosive environment.

Parts built from EOS NickelAlloy IN625 can be heat treated and material properties can be varied within specified range. Parts can be machined, spark-eroded, welded, micro shot-peened, polished and coated in both as-built and in heat treated conditions. Due to the layerwise build- ing method, the parts have a certain anisotropy - see Technical Data for examples.

This document provides information and data for parts built using EOS NickelAlloy IN625 powder (EOS art.-no. 9011-0022) on the following system specifications:
  • EOSINT M 270 Dual Mode with PSW 3.5 and EOS Original Parameter Set IN625_Surface 1.0

Typical achievable part accuracy:
small parts ± 40-60 µm
large parts ± 0.2%
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
EOS GmbH 产品展示 种类
EOS NickelAlloy IN625 Nickel
PrimePart® PLUS PA 2221 尼龙12
EOS PA 1101 尼龙 11
EOS Titanium Ti64 Titanium
EOS CobaltChrome SP2 Cobalt
EOS PA 2202 black 尼龙12
EOS PA 2241 FR 尼龙12
PrimeCast® 101 PS (专用型)
EOS PA 2200 Top Speed 1.0 尼龙12
EOS Alumide® 尼龙12

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved