PrimeCast® 101

牌号PrimeCast® 101
厂家EOS GmbH
分类PS (专用型)
介绍PrimeCast 101, a grey powder on polystyrene basis, is suited especially for investment casting due to its excellent dimensional accuracy and its low melting point.

Laser-sintered parts made from PrimeCast 101 possess excellent material properties:
  • excellent dimensional accuracy
  • very high surface quality
  • good strength for use as lost pattern

The typical application for PrimeCast 101 is the production of lost patterns for the plaster and ceramic shell casting process. The material is optimised for minimum residue ash content after burning-out. Another application for PrimeCast 101 is the production of master patterns for vacuum casting, herby it is advised to infiltrate the parts with e.g. epoxy resin.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
EOS GmbH 产品展示 种类
EOS StainlessSteel 316L Steel
EOS PEEK HP3 PAEK
EOS Alumide® 尼龙12
EOS Titanium Ti64 Titanium
EOS Aluminium AlSi10Mg Aluminum
EOS PA 2200 Speed 1.0 尼龙12
EOS NickelAlloy HX Nickel
EOS CobaltChrome MP1 Cobalt
EOS NickelAlloy IN625 Nickel
PrimePart® PLUS PA 2221 尼龙12

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved