AFCONA 3775

牌号AFCONA 3775
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Leveling agent with very high defoaming effect for solvent-based coatings.

Product Properties:

  • AFCONA-3775 is an acrylic polymer tailor made for those applications that need good leveling as well as high defoaming effect like coil coatings and other foam sensitive systems. It is recommended as non-silicone leveling agent where silicone is not permitted due to intercoat adhesion problem.

AFCONA-3775:

  • Next to the fast initial leveling it also improve the last stage leveling (before the coating become not flowable anymore)
  • prevents foam formation
  • works as deareator and defoamer
  • does not interfere with intercoat adhesion

Most leveling agent stabilized foam due to good compatibility and low surface tension. However AFCONA - 3775 come with strong defoaming property as well as a very good leveling agent.

It is suitable for all solvent-based coatings, especially for:

  • All paint systems applied by roller or dipping, that needs next to a good leveling a strong defoaming performance without crater formation, like coil coatings and can coatings.
  • Sometime recommended to combine AFCONA - 3670 or AFCONA - 3700 to further improve substrate wetting and anti-crater properties.
  • 2 pack PU coatings and epoxies
  • All baking paints
  • Matt finished wood coatings and sealers.
  • Not suitable for unpigmented high gloss systems, because due to the high defoaming effect, it will give in-can haziness.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3034 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3285 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3035 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 6788 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3232 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3038 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3250 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3085 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved